I got a Cisco 350AP and after about 30min of power the ethernet (fec0) port looses it's link light. I've replaced the POE adapter, didn't help. I've tried multiple switches both Cisco and non-Cisco, both POE capable switches and el-cheap-o switches. Multiple cables, all test good with a fluke. All the same result. Loss if link light. I've messed with the Speed setting. Nothing. I've reset the box with the little paper-click-push-button. Nothing. I'd love to flash it, but the flash procedure fails everytime. Is there some more advanced diag stuff I can do? It posts and boots fine. Anything else I can try? -- Bob Tanner <tanner at mn-linux.org> | Phone : (952)943-8700 http://www.mn-linux.org, Minnesota, Linux | Fax : (952)943-8500 Key fingerprint = AB15 0BDF BCDE 4369 5B42 1973 7CF1 A709 2CC1 B288 _______________________________________________ Twin Cities Wireless Users Group Mailing List - Minneapolis/St. Paul, Minnesota http://www.tcwug.org tcwug-list at tcwug.org https://mailman.real-time.com/mailman/listinfo/tcwug-list