On Mon, Aug 18, 2003 at 10:26:12AM -0500, Ben Kochie wrote: >-----BEGIN PGP SIGNED MESSAGE----- >Hash: SHA1 > >> things you may not have thought of. BTW, the DWL-900+ Ben speaks of >> also does 22Mbs, hence the '+', the only caveat is the lack of linux >> drivers for these cards. > >I was speaking about this AP, which doesn't require drivers. and with the >AP config, it can be locked to pure b mode. so no problems with any OS :) Yes, I realize that, and you are very much correct. I was speaking on using the 22Mbs mode for increased throughput. Which brings me to something I hadn't thought of before. If you buy two of these dwl-900+ you can solve most, if not all of your problems. Just configure the two radios in point-to-point (dlink speak) mode using the full 22Mbs setting. As long as the replaytv (or the computer it connects to) has a NIC, you are golden (you will need a XOR cable). The 900+ plus will also allow you to configure the unit to set the diversity to the external anttenna, which you can then attach an external antenna if you need one. However, if this is from downstairs to upstairs, you will probably be ok with the stock antennas. -- Linux Administrator || Technology Specialist || Wifi Engineer http://autonomous.tv/~spencer/resume/ || spencer at autonomous.tv Key fingerprint = 173B 8760 E59F DBF8 6FD2 68F8 ABA2 AB08 49C7 4754 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://shadowknight.real-time.com/pipermail/tcwug-list/attachments/20030818/ef408574/attachment.pgp